5-stages RO Hot&Cold Alkaline Water Filter Dispenser (YC-R530C)

  • 5-stages superb filtration
  • Alkaline super-hydrating   (pH 8.5-10)
  • Anti-oxidant and hydrogen water (Low negative ORP -150 to -300mv,H2 concentration 800-1000ppb)
  • Hot&Cold water dispenser
Enquiry

Description

This 5-Stage RO Hot & Cold Water Purifier Dispenser removes 99% contaminants such as chlorine, taste, odor, VOCs, as well as toxic fluoride, arsenic, lead, nitrates, heavy metals and 1000+ contaminants from your tap water, meanwhile, it converts the filtered water into alkaline and ionized water with hydrogen.

  • Creates good tasting water with alkaline and antioxidants, which improve your systemic acid/alkaline balance.
  • Low negative ORP reducing the Oxygen Reduction Potential, giving strong antioxidant potential.
  • Activated hydrogen helps eliminate active oxygen.

Advantages:

  • Food-grade BPA free AS
  • Easy operation
  • NSF approved Post Activated Carbon Filter
  • Filtration and heating in one machine
  • Low rate of wasted water

5-stages Reverse Osmosis superb filtration

Stage 1: 5 Micron PP Sediment Filter(PP Filter)

Effective to remove dirt, rust and sand particles.

Stage 2: Granule Activated Carbon Filter( GAC Filter)

It takes out 99% of the chlorine and organic chemicals. It provides reduction of taste, odor, and color.

Stage 3: Block Carbon Filter ( CTO Filter)

It takes out 99% of the chlorine and organic chemicals. It provides reduction of taste, odor, and color.

Stage 4: Reverse Osmosis Membrane Filter(RO Filter)

A thin film composite (TFC) high quality membrane that processes 75 gallons per day. It remove the following hard water contaminants that may be present in your water: lead, cooper, barium, chromium, mercury, sodium, cadmium, fluoride, nitrite, nitrate, and selenium.

Stage 5: Alkaline Post Carbon filter(T33 Filter)

This carbon post filter removes objectionable tastes and odors to enhance the quality of your drinking water. It adjusts the water pH range, make the filtered water alkaline and anti-oxidant, rich hydrogen.

Technical data:

  • Item size: 595*200*460mm
  • Material: ABS
  • Water flow: 11.8L/H
  • Water source: Tap water or rural water
  • Incoming water pressure: 0.1~0.4Mpa
  • Inlet water temperature：5℃-45℃
  • Capacity: 75G RO membrane
  • Diaphragm Booster Pump with Adaptor: 110V/220V,50/60HZ
  • Working pressure: ≤0.6Mpa
  • Incoming water TDS limit: ≤1000PPm
  • Flush method: Auto Flush
  • Hot water temperature: Max 95℃
  • Cold water temperature: Min 6℃